深埋矿体移动带三维圈定方法及应用

针对深埋矿山开采移动带二维圈定方法工作量大、精度低且难以满足日益增长的经济效益需求的问题，提出了一种深埋复杂矿体移动范围三维确定方法。结合沙岭金矿千米深井工程实例，在移动范围确定过程中，借助先进的3D建模技术获得三维矿山模型。该模型可以实现各类地质体的可视化，直观地展示其形态与产状，清晰地反映各构成因素间的相互关系。在3D模型中截取的特征剖面与经典移动带圈定岩移参数获取方法相结合，能轻松获得各特征剖面上的岩移参数值。通过给定的岩移参数值进而确定各特征剖面上的地表移动边界点，将各移动边界点连接即可实现矿山移动范围的圈定。研究结果表明，基于三维地质建模技术的移动带圈定方法合理可行，确定的纱岭金矿地表移动带能够兼顾安全生产与经济效益，为矿山生产开发奠定了有益基础，为类似矿山提供了有益借鉴。     

某污水处理厂MBR膜系统改造与运行管理

某污水处理厂设计规模为10万t/d,采用AAO+MBR工艺,设计出水水质满足《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准。由于运行时间较长,MBR运行系统存在产能下降、膜丝断丝脱落、污堵和清洗频次以及强度增加等问题,严重影响正常生产运行。针对MBR系统运行中存在的问题,文中提出具体改造建议,并总结运行经验,进一步优化MBR膜系统的运行维护管理,为其他污水厂MBR膜系统运行问题提供解决思路和维护管理经验。     

Thermoplastic and low dielectric constants polyimides based on BPADA-BAPP

ABSTRACT

The thermoplastic and low dielectric constants polyimides were introduced. The polyimides were prepared by pyromellitic dianhydride (PMDA) or 4,4?-(4,4?-Isopropylidenediphenoxy)diphthalic anhydride (BPADA) as anhydride monomer and 4,4?-oxydianiline (ODA) or 2,2-bis(4-(4-aminephenoxy)phenyl)propane (BAPP) as amine monomer. The polyimides were well characterized by FT-IR, thermogravimetric analysis, dynamic thermomechanical analysis, dielectric measurement, and tensile test. The dielectric constants were 2.32–2.95 compared with 3.10 of ODA-PMDA polyimide, while partly polyimides were thermoplastic. The results indicated anhydride monomers, containing lateral methyl groups, made polyimides become thermoplastic. The results of molecular simulations via Materials Studio also proved this conclusion.     

Crosstalk-aware multi-bit flip-flop generation for power optimization

Applying multi-bit flip-flops (MBFFs) for clock power reduction in modern nanometer ICs has been becoming a promising lower-power design technique. Many previous works tried to utilize as more MBFFs with larger number of bits as possible to gain more clock power saving. However, an MBFF with larger number of bits may lead to serious crosstalk due to the close interconnecting wires belonging to different signal nets which are connected to the same MBFF. This paper analyzes, evaluates, and compares the relationship between power consumption and crosstalk when applying MBFFs with different numbers of bits. To solve the addressed problem, a novel crosstalk-aware power optimization approach is further proposed to optimize power consumption while satisfying the crosstalk constraint. Experimental results show that the proposed approach is very effective in crosstalk avoidance when applying MBFFs for power optimization.     

绿色低钠盐生产技术研究

绿色低钠盐由地下卤水经自然蒸发,浓缩成饱和卤水后,再利用太阳光照自然蒸发制成,有溶解速度较快、味咸而不苦、久放不结块等特点。文章介绍了一种利用新工艺生产的绿色低钠盐的特点,详细探讨了生产绿色低钠盐的工艺条件,并对低钠盐市场进行了分析。     

Preparation of porous ultra low k films using different sacrificial porogen precursors for 28 nM technological node

In order to reduce resistance capacitance (RC) delay and crosstalk between adjacent interconnect lines, the porous ultra low k (PULK) film with dielectric constant value ranging from 2.4 to 2.6 was introduced to be used as an insulator of the Cu integration in back end of the line (BEOL) for 28 nm technological node. In this paper, the PULK films were deposited by plasma enhanced chemical vapor deposition (PECVD) using two different sacrificial organic porogen precursors of bicycloheptadiene (BCHD) and alpha-terpinene (ATRP), and then the above co-deposited films were expose to UV radialization for removing sacrificial organic porogens to create pores. The effects of the different sacrificial organic porogen on the PULK film properties such as the dielectric constant, pore and porosity, k shift, mechanic strength, and RC were studied in detail. Results indicated that the hardness and modulus of the PULK film for the BCHD and ATRP precursors were 0.7 and 5.1 GPa and 1.0 and 7.1 Gpa, and their pore radiuses and porosities were 1.18 nm and 25% and 0.95 nm and 23%. The dielectric constant value of the PULK film for the BCHD and ATRP precursors were measured as 2.48 and 2.59 with Hg probe. The adhesion test indicated that the interfacial strength of the PULK film for the ATRP precursor was higher than that of the PULK film for the BCHD precursor. By the RC examination, it was seen that RC curve of the PULK film for the ATRP precursor was located below the curve of the PULK film for the BCHD precursor.     

Prediction of Long-Term Treatment Response to Selective Serotonin Reuptake Inhibitors (SSRIs) Using Scalp and Source Loudness Dependence of Auditory Evoked Potentials (LDAEP) Analysis in Patients with Major Depressive Disorder

Background: Animal and clinical studies have demonstrated that the loudness dependence of auditory evoked potentials (LDAEP) is inversely related to central serotonergic activity, with a high LDAEP reflecting weak serotonergic neurotransmission and vice versa, though the findings in humans have been less consistent. In addition, a high pretreatment LDAEP appears to predict a favorable response to antidepressant treatments that augment the actions of serotonin. The aim of this study was to test whether the baseline LDAEP is correlated with response to long-term maintenance treatment in patients with major depressive disorder (MDD). Methods: Scalp N1, P2 and N1/P2 LDAEP and standardized low resolution brain electromagnetic tomography-localized N1, P2, and N1/P2 LDAEP were evaluated in 41 MDD patients before and after they received antidepressant treatment (escitalopram (n = 32, 10.0 ± 4.0 mg/day), sertraline (n = 7, 78.6 ± 26.7 mg/day), and paroxetine controlled-release formulation (n = 2, 18.8 ± 8.8 mg/day)) for more than 12 weeks. A treatment response was defined as a reduction in the Beck Depression Inventory (BDI) score of >50% between baseline and follow-up. Results: The responders had higher baseline scalp P2 and N1/P2 LDAEP than nonresponders (p = 0.017; p = 0.036). In addition, changes in total BDI score between baseline and follow-up were larger in subjects with a high baseline N1/P2 LDAEP than those with a low baseline N1/P2 LDAEP (p = 0.009). There were significantly more responders in the high-LDAEP group than in the low-LDAEP group (p = 0.041). Conclusions: The findings of this study reveal that a high baseline LDAEP is associated with a clinical response to long-term antidepressant treatment.     

Induction of Oxidative Stress and Antioxidative Mechanisms in Arabidopsis thaliana after Uranium Exposure at pH 7.5

To evaluate the environmental impact of uranium (U) contamination, it is important to investigate the effects of U at ecologically relevant conditions. Since U speciation, and hence its toxicity, strongly depends on environmental pH, the present study aimed to investigate dose-dependent effects of U at pH 7.5. Arabidopsis thaliana plants (Mouse-ear Cress) were exposed for three days to different U concentrations at pH 7.5. In the roots, the increased capacities of ascorbate peroxidase and glutathione reductase indicate an important role for the ascorbate-glutathione cycle during U-induced stress. However, a significant decrease in the ascorbate redox state was observed after exposure to 75 and 100 µM U, indicating that those roots are severely stressed. In accordance with the roots, the ascorbate-glutathione cycle plays an important role in the antioxidative defence systems in A. thaliana leaves exposed to U at pH 7.5 as the ascorbate and glutathione biosynthesis were upregulated. In addition, small inductions of enzymes of the antioxidative defence system were observed at lower U concentrations to counteract the U-induced stress. However, at higher U concentrations it seems that the antioxidative defence system of the leaves collapses as reductions in enzyme activities and gene expression levels were observed.     

低速电机驱动翻板机构的设计与校核

介绍一种低速电机驱动连杆机构来实现接水翻板的运行,连杆机构设计为反平行四边形机构,由一台低速电机作为动力源、连杆作为执行机构、推动翻板打开与合拢,实现翻板接水工作,从而保证压滤机各工艺的正常。此方案结构简单,成本低廉,运行稳定可靠。     

Monte Carlo calculations on transmutation of plutonium and minor actinides of pebble bed high temperature reactor

The paper aimed to maximize the fuel burnup performance of plutonium and minor actinides fueled pebble bed high temperature reactor (PBMR-400). The PBMR-400 was designed as a reference core. The neutronic calculations were performed by the code combination MCNP-ORIGEN-MONTEBURNS. In this study, neutronic performances of three different types of nuclear fuels (Reactor Grade Plutonium – RGPu; Weapon Grade Plutonium – WGPu and Minor Actinides – MAs) combined with natural uranium were conducted in a PBMR-400 full core. The neutronic performances were compared with the original uranium fuel designed for this reactor. Neutronic calculations showed that 9.6 wt % enriched uranium has a core effective multiplication factor (k_eff) of 1.2395. Corresponding to this k_eff values the natural UO₂/RG-PuO₂; natural UO₂/WG-PuO₂ and natural UO₂/MAO₂ mixture were found 70%/30%, 76%/24% and 63%/37%, respectively. The operation times were computed as ∼2000, ∼2500 and 1400 days whereas, the corresponding burnup values were obtained as ∼163 000, ∼194 000 and ∼116 000 MWD/T, respectively, for end of life k_eff set equal to 1.08.